Before calling a plumber, try to unclog your drains and toilets yourself by using a plunger. Make sure you use a standard bell-shaped plunger for your sink and shower drains and a plunger with a flanged end for your toilets. If neither type can loosen the pipe blockage, put a plumber's snake to use. Ratchet the snake down the pipe to eliminate any clogs.
You receive a full range of plumbing solutions, from sewer repair to water treatment. Every job is carried out with your safety and comfort at top of mind. We only use the latest technology, proven solutions, and make sure all work complies with local code. Our goal is to provide you with the best solution for your needs and leave you with greater peace of mind.
Garbage disposals can be pretty dangerous areas in your household if not dealt with correctly. For this very reason, it is imperative to know how to properly clean your garbage disposal. Before we dive into all the different things you can do to clear out your disposal… In the future, if you aren’t already with the times, get yourself one of our very own Disposal Genies! One of our absolute biggest hits of a product is the perfect way to block any unwanted object from entering your disposal. This pretty much eliminates any need to clean out our disposal, so you would be saving yourself a ton of time! Check it out here Anyways, without further ado, let’s get to cleaning that disposal! Keep in mind, you should always check after each step making sure it still is not working. If it is working, then no more work is needed! PHYSICALLY REMOVE LARGER OBJECTS: This step is one of the most dangerous of them all. In order to do this, you MUST turn the fuse off for your sink area or pull the plug underneath the sink (whichever applies to you) so that way you eliminate the danger all together. Once this is done, it would be prudent to use either pliers or tongs to remove the objects! FLUSH YOUR DRAIN: After removing objects, the next step is to flush your drain with HOT water and soap. Something as simple as this can help clean your disposal of any issues…
So we start by cleaning the joints to be soldered. Okay. In this case we're going to use these two pieces of pipe. You just kind of wrap it around, and you're going to clean it. Be judicious with the cleaning. Okay. I don't want to see any black marks on that recently sanded pipe. That's carbon. That will cause a leak. That's another reason I'm wearing gloves. People might call me a primadonna for doing so, but it actually keeps the oils in your hands off of the joint. This is not conducive to soldering. The oils in your hands are not conducive to soldering. So now we're going to take our fitting and our fitting brush, okay, just a wire brush. This one's kind of beat up, but it will still get the job done. Again same idea, you twist it around in there until you can see your reflection. So we've got a nice, clean 90-degree elbow. The next thing you want to do, again the gloves come in, they're very imperative here.